Porsche 718 Spyder 4.0 Titanium DPF to Backbox fixing Kit

£105.00

Porsche 718 Spyder 4.0  Titanium DPF to Backbox fixing Kit

Broken off or damaged Exhaust  bolts ?
Want to change your Exhaust backbox easily or future proof your exhaust from corrosion or even worse the exhaust is blowing ?

This high precision Titanium Stud and K-nut set is designed and manufactured  in the UK to replace the OEM Porsche studs and nuts that fix the exhaust back box to the Dust Pollution Filter. The OEM bolts  over a period of being subjected to road crud and constant head/cool cycles rust away or just break off when you try to remove them .

porsche-parts-exhaust-manifold-titanium -studs-manufactured-by-verboten-motorsport

Availability: 2 in stock

Porsche 718 Spyder 4.0 Titanium DPF to Backbox fixing Kit

 

This Porsche 718 Spyder 4.0 Titanium DPF to Backbox fixing Kit is designed and manufactured to replace the OEM Porsche studs and nuts that fix the exhaust back box to the Dust Pollution Filter . It is prudent to replace the OEM studs and nuts that over time and being subjected to road crud rust away.

The studs ,ten of them in this kit, are made of titanium with a roll formed thread to ensure superb quality of thread.

The K-nuts ,ten of them in this kit, have been specified due to their ability to not work loose during service even when subjected to vibrations. The K-nut is a very clever fixing that is used in the aerospace and motorsport industries where parts falling off could cause catastrophic accidents. K-nut can only be used up to five times but its prudent to change them each time they are replaced. The K-nut locks by miss-forming the thread when being put under load.

Fitting these titanium studs future proofs the removal-re-installation of  the exhaust backbox as the studs do not rust even when subjected to years of heat-cool cycles , road salt and moisture

This Porsche 718 Spyder 4.0 Titanium DPF to Backbox fixing Kit set is designed and manufactured to replace the OEM Porsche studs and nuts that fix the exhaust back box to the Dust Pollution Filter . It is prudent to replace the OEM studs and nuts that over time and being subjected to road crud rust away.

 

Manufactured in the UK by :
Weight0.4 kg
  • 10 x High precision titanium studs with roll formed threads to ensure superb quality of thread.
  • 10 x K-nuts ,have been specified because they lock around the stud thread to ensure they do not vibrate lose.
  • 2 x M8 Mild Steel nuts to help with installation of studs

Use the 2 x M8 Mild Steel nuts to help with installation of studs by locking them together and then removing/installing the studs

You may also like…

Shopping Basket